DE | EN

FLEYG®

The ramp for steel road plates

without Fleyg®

with Fleyg®

The ideal, noise-eliminating ramp solution for driving over steel road plates used to cover trenches in road construction

NEW: Fleyg Plus®

HOW DOES fleyg® Work?

Steel road plates are indispensable for road construction to guide vehicles, bicycles and pedestrians safely over obstacles on construction sites.

Previously, steel road plates were generally installed by pouring concrete ramps. This is time-consuming and expensive, and steel road plates installed using this method make a significant amount of noise when crossed.

THE SOLUTION IS FLEYG®. The FLEYG® ramp from Beyeler & Fischer is made predominantly from rubber, which offers a noise-dampening effect. FLEYG® is water-repellent and non-slip. Its reflective markings also improve its visibility.

Benefits of FLEYG®

  • Quick and easy to lay
  • Can be reused
  • Cost-saving compared to ramps made using a coating
  • Highly visible thanks to reflective markings

OTHER BENEFITS

NOISE REDUCTION

Does not clatter when driven over.

FEWER TRIP HAZARDS

Trip hazards are eliminated as height differences are levelled out.

SAFETY THROUGH VISIBILITY

Reflectors ensure that the obstacle is visible day and night.

INCREASED SLIP RESISTANCE

The special surface structure massively reduces the risk of slipping.

SUSTAINABLE AND ENVIRONMENTALLY FRIENDLY

Made of rubber and recycled rubber. Can be reused again and again.

COST-EFFECTIVE

Acquisition costs are recouped after five uses.

PRODUCT INFORMATION

There are various versions of the ramp available. Create the ramp that suits your needs.

Based on the mass of the average steel road plates used in Europe, we recommend 6-8 metres of FLEYG® ramp per plate.

FLEYG®

There are various versions of the ramp available. Create the ramp that suits your needs.

Download Flyer

FLEYG® 100

  • 1000 x 400 x 42 mm
  • 12.4 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

FLEYG® 75

  • 750 x 400 x 42 mm
  • 9 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

FLEYG® 25/25 (Ecke)

  • 250 x 250 x 42 mm
  • 9 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

FLEYG PLUS®

There are various versions of the ramp available. Create the ramp that suits your needs.

Download Flyer

FLEYG PLUS® 100

  • 1000 x 400 x 42 mm
  • 12.4 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

FLEYG PLUS® 75

  • 750 x 400 x 42 mm
  • 9 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

MAGNETS

  • 24 mm

FLEYG HIGHWAY®

There are various versions of the ramp available. Create the ramp that suits your needs.

Download Flyer

FLEYG HIGHWAY® 100

  • 1000 x 800 x 32 mm
  • 25 kg
  • Can be cut
  • Weather-resistant

90% recycled rubber & 10% aggregates

MAGNETS

  • 24 mm

pavement-ramp

There are various versions of the ramp available. Create the ramp that suits your needs.

pavement-ramp 45

  • 1000 x 250 x 45 mm
  • 7.5 kg
  • Weather-resistant
  • Black, red

Image shows black model

90% recycled rubber & 10% aggregates

pavement-ramp 75

  • 1000 x 250 x 75 mm
  • 9.5 kg
  • Weather-resistant
  • Black, red

Image shows red version

90% recycled rubber & 10% aggregates

pavement-ramp 90

  • 1000 x 250 x 90 mm
  • 12.5 kg
  • Weather-resistant
  • Black, red

Image shows black model

90% recycled rubber & 10% aggregates

pavement-ramp 110

  • 1000 x 250 x 110 mm
  • 14.5 kg
  • Weather-resistant
  • Black, red

Image shows red model

90% recycled rubber & 10% aggregates

pavement-ramp 150

  • 1000 x 250 x 150 mm
  • 18.5 kg
  • Weather-resistant
  • Black, red

Image shows black model

90% recycled rubber & 10% aggregates

Where is FLEYG®   being used?

Highest load

Motorway, expressways.

Medium load

Main roads, municipal roads.

Low load

Urban areas, pedestrian paths, cycle paths.

FLEYG® STORIES

ASTRA Bundesamt für Strassen

In cooperation with Basler & Hoffmann Planungsbüro and Marti AG Bauunternehmung we were able to use our FLEYG® solution on the motorway section on the A3 between Murg and Walenstadt in April 2019. 16,000 cars & trucks cross these ramps every day! FLEYG® can withstand the highest loads. The client for this project was the ASTRA Bundesamt für Strassen (Federal Roads Office Switzerland).

FLEYG® in Use

These companies already use FLEYG® for their projects:

BEZUGSQUELLEN

SCHWEIZ

HG COMMERCIALE
Stauffacherquai 46
Postfach
CH-8022 Zürich

T +41 44 296 62 11
www.hgc.ch/fleyg

T +41 44 296 62 11 Website

Dähler Verkehrstechnik AG
Salinenstrasse 63
CH-4133 Pratteln

T +41 61 826 50 50
www.daehler-vt.ch

T +41 61 826 50 50 Website

Condecta AG
Stegackerstrasse 6
CH-8409 Winterthur

T +41 52 234 51 51
www.condecta.ch

T +41 52 234 51 51 Website

Germany*

Fleyg AG
Bäumleingasse 22
CH-4051 Basel

* plus übriges Europa

Jan Buhlke
T +49 175 34 66 877

Jan Buhlke
T +49 175 34 66 877

BENELUX

BouwTerreinPro

T +31 62 280 29 36
www.bouwterreinpro.nl

T +31 62 280 29 36 Website

Austria

QUESTER Baustoffhandel GmbH
Heiligenstädter Straße 24
A-1190 Wien

T +43 50 161 67 10
www.quester.at

T +43 50 161 67 10 Website

SWEDEN

AB ProVia Vägmärkning
Vidövägen 51
S-663 34 Skoghall

T +46 10 410 44 00
www.provia.se

T +46 10 410 44 00 Website